CMT - Tester

CMT - Tester

Test system based on VPC G12 interface, where signal conditioning cards are located directly from the rear side of the G12 receiver

 

Download the datasheet here

 

The tester is also suitable for integration into test and assembly lines with a connection to user databases and interfacing with quality management systems. Possibility of graphic presentation of results. Possibility to modify the parameters of the measured plate during the test run on the basis of the measured values.

FEATURES AND BENEFITS

  • VPC G12 interface - interchangeable fixtures
  • Quick exchange of test application
  • Minimum of equipment in the fixture - fixture only as contacting interface
  • Manual fixtures ATX
  • Fixture identification - automatic test program loading
  • Connection to external meas. instruments
  • Controled by SCADUS / LabView
  • Selftest of internal cards and connected instruments
  • Central test program, configuration and datalog files location possibility (server)
  • Uninterruptible power supply for PC

 

Interface VPC - G12

 

Internal instruments

CMT_PDU

  • Power distribution unit
  • Contains safety parts
  • Provides 5V, 12V, 24V power supply for tester and fixture
  • Power supply monitoring
  • Selftest


 

CMT_RMX

  • Reed relay matrix 6 x 80Inquiry
  • Input multiplexer 2 x 6
  • Total of 520 relays
  • High density Pickering reed relay 124-1-A-5/2
  • Low level „cold“ switching 100V/100mA
  • Integrated selftest (no external adapter needed)


CMT_MX
 



CMT_MX

  • Relay matrix 96 pins (8 x 12)
  • Rated current 2AInquiry
  • Max. switching voltage 220 VDC / 250 VAC
  • Switching power 60W
  • Selftest

CMT_MX


 

CMT_OC

  •     64 open collector switches 24V/300mA
  •     Switching against the groundInquiry
  •     Readback capability
  •     Selftest

CMT_OC


 

CMT_SSR

  •     16 isolated solid state switches 60V/5A continuous
  •     SelftestInquiry

CMT_SSR


 

CMT_IIF

  •     Instrument interface
  •     Allows to connect up to 4 programmable power suppliesInquiry
  •     Connection to DMM and LCR
  •     Selftest

CMT_IIF


 

CMT_CIF

  •     Communication interface
  •     Allows to connectInquiry
    •      2xUART
    •     4xRS232
    •     2xRS485
    •     2xLIN
    •     2xCAN
    •     2xFLEXRAY
    •     2xUSB
    •     2xETH

CMT_CIF


 

CMT_SIF

  •     Special interface
  •     Allows to connectInquiry
    •     Oscilloscope
    •     Generator LF RF
    •     Spectrum analyser
    •     High voltage power supply
    •     High current power supply
    •     AC power supply
    •     Source measure unit


 

CMT_PNU

  •     Pneumatic distribution unit
    •     12 x pneumatic valvesInquiry
    •     Air pressure monitoring
    •     Selftest

CMT_PNU


CMT_MCU

  •     Microcontroller unit based on STM32F103VGT6
    •     Galvanically isolated from testerInquiry
    •     3V3 voltage level
    •     IO line protection
    •     Selftest

CMT_PNU

 


CMT_DMM

  • Fully isolated 4½ digit DMM, meassures: VDC, VAC,IDC,IAC, RES,CAP, Diode,Freq., MAX 70V & 1Amp
  • Programmable PSU 0-13,5V,0-1A
  • Dual core ARM MCZ,16MB Flash, 8MB RAM, USB & Ethernet
  • 40 Reed Relay Scanner points
  • Isolated CAN converter,  RS485, RS232, TTL communication
  • 12bit DAC + ADC, 0-12Vout, opto isolated digital I/O 4+4
  • 96-way DIN 41612 EURO connector or optional usage of VPC
  • Optional expansions: I2C, SPI, general purpose rellays

 

Scroll up